You searched for "vp9cc"

The extractor mounts into the right side of the slide and serves to remove the spent casing from the slide after firing during the extraction step of the 8 step cycle of operation.

The disconnector mounts into the right side of the trigger housing and serves to prevent out of battery fire by ensuring that the slide is fully locked before firing can occur.

The ejector is mounted within the trigger housing and serves to push the spent casing off the breach face as the slide is moving to the rear after firing.

The accessory grip frame provides a similar grip to the standard model, but without the Picatinny interface forward of the trigger guard.

The extractor spring fits inside the extractor channel in the slide and provides rebound pressure to the extractor.

Clamp sleeve for VP9CC firing pin safety axle

The safety clamp mounts into the left side of the trigger housing and serves to prevent the internal components from shifting out of position when the trigger housing is removed from the grip frame.

The VP9CC is sold as a complete unit consisting of the trigger, trigger safety and trigger bar. It is mounted within the trigger housing.

The catch pin is mounted inside the rear of the trigger housing and secures the catch in place.

The ejector pin is mounted inside the rear of the trigger housing and secures the ejector in place.

The catch spring is mounted into the rear of the trigger housing and provides rebound pressure to the catch/sear.

The ten-round magazine is the most compact option, providing a flush fit with the base of the grip frame.

The recoil spring assembly mounts to the barrel and slide and provides the necessary resistance to the slide assembly during firing.

The slide plate mounts into the rear of the slide and serves to secure the firing pin assembly in place.

The disassembly safety is mounted within the trigger housing and serves to prevent the slide to be removed from the receiver until the magazine (source of ammunition) is removed from the pistol.

The catch/sear is moutned within the rear of the trigger housing and works in concert with the release catch for the sear, to secure the firing pin until the trigger is pulled.

The ambidextrous paddle magazine catch fits inside the trigger guard and serves to secure and release the magazine within the pistol.

The disassembly lever is mounted into the left side of the grip frame and trigger housing and allows the slide to be removed from the receiver.

The 12-round magazine is the largest magazine capacity offered and provides a full grip for operators with larger hands.

The extractor clamping sleeve is mounted into the top of the slide and secures the extractor in place.