You searched for "vp9cc"

The slide release spring is mounted inside the trigger housing and provides rebound pressure to the slide release.

The trigger return spring is mounted in to the center of the trigger and provides both resistance during the trigger pull and rebound pressure during the reset

The front clamping sleeve is mounted above the trigger and secures the trigger housing to the grip frame.

The rear clamping sleeve is moutned into the upper rear of the grip frame and secures the rear of the trigger housing to the grip frame.

The firing pin safety, otherwise referred to as the drop safety is mounted into the rear of the slide and serves to block the firing pin's forward movement until the trigger is pulled and the trigger bar sweeps it out of position, clearing the firing pin channel.

The slide cover plate is moutned into the top if the slide when an optic mounting plate and optic are not present.

The release catch for the sear is mounted within the rear of the trigger housing and makes contact with the rearward movement of the trigger bar when the trigger is pulled, then pivoting the sear to allow it to release the firing pin.

The small back strap provides the smallest overall grip dimensions.

The medium back strap provides additional length of pull distance over the small model, for operators with slightly larger hands.

The large back strap provides additional length of pull distance over the medium model, for operatros with the largest hand sizes.

The magazine catch spring is moutned into the magazine catch and then into the grip frame and provides rebound pressure to the magazine catch.

The left side charging support mounts into the rear of the slide and provides additional gripping surface for manually cylcing the slide.

The right side charging support mounts into the rear of the slide and provides additonal gripping surface for manually cylcing the slide.

The left slide slide release mount into the trigger housing and allows the slide to be locked to the rear and released from the left side of the pistol.

The right side slide release is moutned into the grip frame and trigger housing and allows the slide to be locked to the rear and released from the right side of the pistol.

The magazine catch clamping sleeve is moutned into the magazine catch and then into the grip frame and secures the magazine catch in place.

The slide cover plates screws secure the cover plate to the slide. They also serve to secure the optics mounting plate to the slide, when moutning an optic. Mounting an optic to the optics plate

The complete firing pin assembly is made up of the firing pin, firing pin main spring, pressure spring for firing pin, support sleeve and two spring washers.

The grip frame with Picatinny rail is allows lights and other accessories to be mounted forward of the trigger guard.

The back strap clamping sleeve is mounted into the lower rear of the grip frame and secures the back strap in place.